What does “hex” describe?
In our range, hex refers to the shaped ends of the blank. It describes the outline, while Standard 2D, 3D Gel and the 4D finishes describe the lettering. You therefore need to make two choices: a suitable blank and a finish available in that format. Neither decision should change the registration itself.
Compare a full plate image when shopping. A close-up of the characters may not show how much material is left near the shaped ends. The registration needs room within the actual outline, rather than an imaginary rectangle around it. Ask the supplier about the finished configuration if the photograph and specification do not make that clear.
Our legal-mode capacity differs by size
| Format | Maximum registration characters | Faces |
|---|---|---|
| 303 × 111mm | 4 | Front or rear |
| 425 × 111mm | 6 | Front or rear |
| 457 × 111mm | 6 | Front or rear |
| 520 × 111mm | 7 | Front or rear |
These are limits for our own products and builder. Spaces do not count as characters, but the correct registration grouping still matters. A normal seven-character registration does not fit our current hex range in road-legal mode. Choose a standard format instead of expecting the number to be reduced to fit.
Keep show configurations separate
Our 457mm hex blank has a different capacity in show mode. That does not extend its legal-mode limit. A preview which accepts a seven-character show layout is not approval to display the same arrangement on the road. Check the order mode as carefully as the size and finish.
The road-legal versus show guide explains that distinction. For the official design requirements behind the checks, use DVLA's number plate guidance. We review road-use orders against the selected configuration; a retail style name is not a substitute for that check.
Check whether the shape suits your mounting
A shaped replacement may reveal old fixing holes near the corners of a rectangular plate. Measure the existing holes and support surface before ordering. A paper template helps you judge what will remain visible, but also check whether your holder grips the shaped blank securely.
Some plate holders rely on the corners or edges of a rectangular blank. Do not assume they will retain a hex plate in the same way. If a different fixing method is needed, confirm that it suits the vehicle and the plate before removing the old installation. Our fitting guide gives the general preparation steps.
Compare the complete price before buying
Our Standard 2D hex single costs £20.99; a pair with both plates in hex formats costs £32.99. Free UK delivery is included. A raised finish or a different combination of front and rear options changes the total, so use the builder summary for your exact selection.
Start with the hex size page, check the registration capacity, then choose the finish. If your priority is simply a shorter rectangle, our short plate guide may be more useful. Choose the blank that works with your number and vehicle, then decide which appearance you prefer.
Official references
Official guidance checked on 25 October 2026. Product prices and options are those listed by A* Number Plates at publication; check your configured order total before payment.
