Free UK delivery on every order

All number plate guides

Motorbike plates

4D motorbike number plates: what to check before buying

Our 4D motorbike number plates use raised 3mm acrylic characters on a 237 × 178mm rear plate and cost £39.99, including free UK delivery. Standard 2D in the same motorcycle size costs £19.99. The choice is mainly about the character finish: you still need the correct registration layout and a suitable mounting arrangement. Here is what to compare before you order, including the finishes we actually make in this size.

By A* Number Plates · Published · 3 min read

What makes the motorcycle plate 4D?

“4D” describes the raised acrylic lettering. Compared with flat printed Standard 2D, its straight edges create a more defined profile when viewed from an angle. The 3mm measurement refers to the acrylic characters; it is not the overall thickness of the finished plate or a change in the registration's legal dimensions.

Look at product photographs from the front and at an angle when choosing. A front-on image shows the character shape, while an angled image helps you judge the raised edge. If you want the simplest replacement at the lowest price, flat 2D may be all you need. Choose 4D because you prefer the appearance, rather than expecting a different registration or a smaller blank.

Compare the two available motorcycle options

Our motorcycle rear plate options
OptionCharacter finishOne rear plate
Standard 2DFlat printed£19.99
4D 3mmRaised acrylic£39.99

Both options use our 237 × 178mm motorcycle blank. The price difference is £20 for one rear plate. These are the available motorcycle finishes in our current range: we do not offer 3D Gel, 4D Gel or 4D Retro in this size. A photograph of those finishes on a car plate should not be taken as evidence of motorcycle availability.

Raised lettering still needs a compliant plate

GOV.UK permits raised characters, but the finish name alone does not establish compliance. The complete plate and its display still need to meet the applicable rules. In particular, do not confuse a road-legal motorcycle layout with a small display plate advertised for a bike meet.

Our 4D legality guide explains the construction and display checks. Start with your actual registration, select road-legal mode for road use and let us check the order details. Do not choose a show option to get a layout that will not fit in legal mode.

Confirm the mounting before ordering

Measure your existing plate and the supporting bracket. At approximately 9.33 × 7.01 inches, our supplied format may be wider than a product described simply as “9 × 7”. Millimetres give you a more reliable comparison. Check fixing locations, plate light position and clearance with the tail tidy manufacturer's instructions.

Raised letters also mean you should plan screw positions carefully. A fixing head should not sit against a character. Our motorcycle fitting guide covers practical preparation; a motorcycle workshop can assess installation questions that depend on the bracket or suspension travel.

Check the order as a rear-only purchase

A motorcycle plate is ordered as one rear plate in our catalogue. Use the 4D 3mm motorbike product if that is the finish you want, or compare both options on the motorbike size page. Check the registration against your entitlement document before payment and follow the required document checks.

Review delivery information if timing matters. Document approval and production affect dispatch, so ordering a plate does not establish a guaranteed arrival date. Confirm the size, finish and fitting arrangement first; that is more useful than paying for the wrong format in a hurry.

Official references

Official guidance checked on 25 October 2026. Product prices and options are those listed by A* Number Plates at publication; check your configured order total before payment.

Related guides

View 4D motorbike plate

Check the size, finish and registration before ordering. Free UK delivery on every order.