Start by removing loose dirt
Rinse away grit before wiping the plate. Dragging a dry cloth across a dirty face can rub particles against the surface. Use a mild wash suitable for the materials and a clean, soft cloth. If the plate or cleaning product has specific care instructions, follow those first.
Clean the front and rear separately and change the rinse water or cloth if it becomes gritty. Rear plates can collect substantial road spray, so do not judge their condition from the front plate alone. The Highway Code's maintenance guidance says number plates must be kept clean and clear.
Take care around raised characters
With 3D Gel, 4D or another raised finish, wipe around the characters gently. Do not use a hard tool to dig out dirt, pull at an edge or attempt to prise off a letter. If a cloth catches on something that appears lifted, stop and inspect it rather than using more force.
Avoid abrasive pads, strong solvents and aggressive polishing products unless the plate maker specifically permits them. Do not direct a close pressure-washer jet into the edges of the plate or characters. Gentle washing is a practical default; the care instructions for the actual construction remain the best guide.
Check the plate after it is clean
Once the dirt is removed, look at the entire registration from a normal viewing position and then inspect the plate closely. Check for lifting layers, damaged characters, spreading cracks or loose fixing heads. Make sure a screw cap or accessory is not covering part of a letter or number.
A plate that looks cloudy when dirty may simply need washing. A plate that remains unreadable or is separating needs closer assessment. Our MOT checks guide explains the difference between minor cosmetic wear and issues affecting the registration's condition or legibility. Do not assume every mark requires replacement, or that every damaged plate can be restored with cleaner.
Inspect the mounting as well as the face
Look for movement, missing fixings or adhesive coming away from the mounting surface. Do not repair a loose plate by adding tape across its face or covering a character. Follow the fixing manufacturer's instructions for cleaning, preparation and installation if the mounting needs renewing.
For adhesive strips, check the permitted application temperature, drying conditions and any curing instructions. Winter weather can make surface preparation harder, so choose a suitable place and time for the job. Our fitting guide helps compare the methods; a damaged bracket or uncertain support should be assessed by a fitter.
Be cautious with ice and packed snow
Remove loose snow gently and avoid striking the plate or using a sharp scraper against it. Do not pour boiling water on the plate or try to bend a frozen blank away from its mounting. Allow ice to loosen using an approach suitable for the plate and vehicle, then clean without force.
Before setting off, check that the registration is clear again. If winter dirt quickly returns on your route, include the plates in your regular vehicle checks. This need not be a full wash every time: the aim is to notice obscuring dirt and deal with it appropriately before driving.
Replace only what actually needs replacing
If one plate is damaged while the other remains suitable, you can order a single front or rear. Our standard-size Standard 2D single starts at £15.99 with free UK delivery. The price guide compares the finishes and pair options if both need replacing.
Measure the existing format and check the registration before ordering. If the mounting caused the damage, address that at the same time. A correctly sized replacement, suitable fixings and gentle care give you a more useful result than repeatedly attaching new plates to the same unresolved mounting problem.
Official references
Official guidance checked on 25 October 2026. Product prices and options are those listed by A* Number Plates at publication; check your configured order total before payment.
